DALI Repeater for installation on a DIN rail

Model: EN-REP-DALI-R

The DALI Repeater device is designed to amplifies the DALI signal and to allow to extend the DALI line length from 300 meters to 600 meters. The device provides electrical…

DALI Power supply for installation on a DIN rail

Model: EN-PS-DALI-R

The DALI power supply designed to supply 16V ±10% and continuous current of 140mA. The continuous current consumption of each DALI unit in steady state is 2mA, with 64 DALI…

DALI Power supply

Model: EN-PS-DALI

The DALI power supply designed to supply 16V ±10% and continuous current of 140mA. The continuous current consumption of each DALI unit in steady state is 2mA, with 64 DALI…

DALI Repeater

Model: EN-REP-DALI

The DALI Repeater device is designed to amplifies the DALI signal and to allow to extend the DALI line length from 300 meters to 600 meters. The device provides electrical…

LED lighting ignition current limiter

Model: EN-ICL-R

.This unit enables proper and reliable operation of electrical equipment which includes input capacitors With a particularly high capacitive value, such as electronic chokes for discharge lamps and drivers for…

Double protection unit for LED luminaires

Model: EN-MES-440

This unit provides dual protection for LED lighting fixtures, which includes current limiting and protection against continuous voltage rises. Inrush current limiter: The device will allow reliable activation of the…

Over Voltage Protection for LED Luminaries

Model: EN-OVP-440

Continuous over voltage protection: This device allow to operate the LED luminaire in the nominal voltage range only. In case of over voltage the device will disconnect the luminaire from…

DALI Individual Metering Switch

Model: EN-MES-DALI

The MES controller is designed to monitor and transmit telemetry from HID Street Light fixture based on magnetic ballast and PF capacitor, 70W-1,000W or LED luminaires. It is communicating using…